Introduction Of 5 Main Heating Methods

(1) central heating in winter, central heating is essential for residential buildings in northern China. Heat source is the main body of the heat company or community boiler room. At present, the vast majority of domestic heating system is coal, gas, oil boiler as the heat source, through the external network or the internal network connected with the indoor system. There is also a central heating system, the central air conditioning system.

(2) household heating. The characteristic that divides household heating means depends on the user can be chosen at will according to his be fond of, use heat to also can measure alone at the same time. With the use of clean energy and the emergence of new technologies and products, the diversified choices of heating methods become possible, and the monopoly of central heating mode is challenged. Heating, hot water integration of the independent household heating and other ways have emerged. The commercialized development of housing, the appearance of large family type, double entry, villa and so on, double bath, double bath, further improved the requirements of household heating equipment and domestic hot water. The integration of home heating facilities and sanitary hot water is favored by more and more real estate developers.

(3) household air-conditioning heating. South China area because of historical custom, need not beforehand set heating establishment in resident residence, but because south humidity is big, the moisture in the air is much, accelerated heat conduction instead, bring about in the south winter appears cold, use air conditioning heating commonly. But the drawback of air conditioning heating is obvious: power consumption, dry air, dust increase, poor comfort.

(4) electric heater. An electric heater heats the air around it, the hot air rises, the cold air is added, and then the cold air is heated again, thus creating a cycle of hot and cold air. This can quickly and efficiently replenish the heat throughout the room. In addition, the wind speed is gentle and not by the fan blowing, the main reason for the formation of air circulation is convection, thus effectively avoid the exhaust fan noise pollution. No metal noise during heating, running quietly.

(5) electrothermal film heating. Electrothermal film heating is a kind of heating after the electricity can be translucent polyester film, electrothermal film heating way is the heat source of electricity, electrothermal film as the heating body, through the infrared wave of infrared direct heat transfer, the comfort of the sun. But its power consumption is big, the area that power is insufficient is unfavorable use. The central heating that divides household heating is to break before namely — also call independent heating, the central heating that oneself home burns oneself home, temperature oneself can adjust at will, this is its biggest advantage. At the same time also has the electric heating health, environmental protection, pollution-free and other characteristics.


Post time: Mar-23-2020